Window Rollup Module, 98 Ford Explorer XLT
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57862
Printed Date: November 07, 2025 at 7:42 PM
Topic: Window Rollup Module, 98 Ford Explorer XLT
Posted By: Gooser
Subject: Window Rollup Module, 98 Ford Explorer XLT
Date Posted: June 16, 2005 at 9:20 PM
Hello, I have a 98 Ford Explorer XLT. I have a aftermarket alarm in. and i want to put in this window rollup module i have. I hooked it up the way i thought, it work about 5 times, then my brain burned out. I figured that i needed a Relay. How would i wire a relay in to make this function work correctly? I have been searching for hours and hours but have had no luck. Thanks in advance.
Replies:
Posted By: mo12v
Date Posted: June 16, 2005 at 9:57 PM
What Model Window Roll-up?
How did you wire it? | Window Up | Driver\ WHT/BLK
Pass\ WHT/YEL
Dr.Rear\ GRY/ORG
Pas. Rear\ YEL/BLK @ MAIN SWITCH | | | Window Down | Dr.F/ TAN/BLU
Pas.F/ TAN/BLU
Dr.R/ YEL/BLU
Pas.R/ YEL/BLK |
Reversal Rest At Ground Power Windows------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: Gooser
Date Posted: June 17, 2005 at 5:10 AM
ITs a generic brand. It was given to me. im trying to thin of the wires. its already in my car.
it has.. Red-12v - hooked up to constant 12v source
Black-Ground hooked up to chassis
Orange- 500mh trigger -hooked this up to the alarms output
Pink-Accessory - hooked this up to accessory wire at ignition switch
wire-driver motor side
wire-driver switch side
wire-pass. motor side
wire-pass. switch side
Posted By: Gooser
Date Posted: June 17, 2005 at 5:11 AM
ITs a generic brand. It was given to me. im trying to thin of the wires. its already in my car.
it has.. Red-12v - hooked up to constant 12v source
Black-Ground hooked up to chassis
Orange- 500mh trigger -hooked this up to the alarms output
Pink-Accessory - hooked this up to accessory wire at ignition switch
wire-driver motor side
wire-driver switch side
wire-pass. motor side
wire-pass. switch side
Posted By: mo12v
Date Posted: June 17, 2005 at 9:15 AM
Sounds like OMEGA AU-93
Hook up as:
Reverse Polarity Rest at Ground
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: Gooser
Date Posted: June 17, 2005 at 8:01 PM
Ok, how would i do that? do you have a diagram b/c i havent found one yet. THANKS MO
Posted By: Gooser
Date Posted: June 20, 2005 at 5:16 AM
ok well, i found the relay diagram. I hooked it up but it didnt work. I hooked it up without the relay and it worked. one thing though. For the Pink wire that is on the Window module. Does that go to the Accessory Output thats on the alarm, or does it go to the Accessory wire on the ignition switch.
|