Print Page | Close Window

1991 explorer remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5788
Printed Date: July 06, 2025 at 5:26 AM


Topic: 1991 explorer remote start

Posted By: new guy
Subject: 1991 explorer remote start
Date Posted: November 22, 2002 at 9:53 PM

Hi Everyone

Love your site.  I'm installing a remote starter in my 1991 explorer.  I have found all the wires I need for the installation in the ignition harness, however I am unable to find the starter wire.  The supplied wire diagram from the manufacturer states that I need a red wire with a blue stripe, your site says a white wire with a pink stripe.  I am unable to find either in the harness and the rest of the wires in the harness don't test as a starter wire.  Does anyone know if there is a trick to finding the location of the starter wire on the 91 explorer?  If so I would greatly appreciate a response.

thanks, New Guy




Replies:

Posted By: joelr7309
Date Posted: November 22, 2002 at 10:18 PM

( 1990-91 Ford Explorer Alarm Information )

I'd  would use a DMM  METER to read the voltage, ground your meter, probe the suspected wire with the positive and try to start the the EXPLORER, it should read 0 and when cranked up it should read 12volts



-------------
THE ROOKIE!~


Print Page | Close Window