Power lock actuators, 2000 Chevy S-10

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=57898
Printed Date: November 08, 2025 at 10:52 PM

Topic: Power lock actuators, 2000 Chevy S-10

Posted By: stagger
Subject: Power lock actuators, 2000 Chevy S-10
Date Posted: June 17, 2005 at 12:32 PM

Im in the process of installing power door lock actuators for my 2000 Chevy S-10 xtreme Pickup.

I cant seem to find a place to mount the actuators inside the door without the windows rail arms hitting the actuators.

Anybody have any help they can provide?

Im in the middle of a project so any help would be so greatly appreciated!

Replies:

Posted By: Tangkilla69
Date Posted: June 17, 2005 at 1:17 PM

Can you squeeze them in behind the door panel? Thats where I try to put all mine b/c normally there's planty of room and they tend to stay drier. You can bend those rods in all sorts of shapes to accomadate location, as long as in the end they are still moving in the same direction as the lock rod. Sorry if this didn't help

-------------

Posted By: KarTuneMan
Date Posted: June 19, 2005 at 1:21 PM

Remeber this too, you can cut out the panaling to make room for the actuator.....it will never be seen...

-------------

Print Page | Close Window