Print Page | Close Window

1998 dodge intrepid, alarm, lock relays

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58047
Printed Date: July 20, 2025 at 12:29 AM


Topic: 1998 dodge intrepid, alarm, lock relays

Posted By: mruffdogg
Subject: 1998 dodge intrepid, alarm, lock relays
Date Posted: June 19, 2005 at 8:23 PM

hello all. ive got 2 questions, installing a alarm on a 1998 dodge intrepid.

instead of using dei 456lw can i use 2 relays hooked up like this?

relay 1

87-12 volts     86- lock from alarm

85-ground      30-2700 ohm resistor to WHITE/ green

relay2

same execpt 30-620 ohm resistor

also how do i hook up the parking light relay so the 110 ohm resistor is to ground?

Any help would be great thanks...




Replies:

Posted By: dare_ds69
Date Posted: June 20, 2005 at 6:45 AM
DODGE, INTREPID, 1998, Power Lock

Locks are positive trigger through resistors. Use 2.7K (2700) ohms for lock and 620 ohms for unlock. MUST use relays.
Parking Lights+ BLACK / YELLOW  +  driver kick panel
Parking Lights- yellow    headlight switch
Notes: Use a 110 ohm resistor to ground (-) for parking lights and a 220 ohm resistor to ground (-) will do both headlights and parking lights.

you just need 110ohm

87 110ohm ground

86 positive parking lights from brain

85 ground

30 goes to yellow wireposted_image



-------------
how own your mind, control your life.
MECP certified. always use a DMM



Posted By: mruffdogg
Date Posted: June 20, 2005 at 3:17 PM

thank you very much


Print Page | Close Window