APS-996 Shock Sensor Problems?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58061
Printed Date: April 29, 2024 at 7:43 AM

Topic: APS-996 Shock Sensor Problems?

Posted By: ManXP
Subject: APS-996 Shock Sensor Problems?
Date Posted: June 20, 2005 at 9:37 AM

I have an interesting problem with Audiovox prestige APS-996 alarm system. Every time I disarm my system, siren beeps 4 times and "hammer" icon is displayed on receiver.

Yes, you can say "May be there was an impact", but if I arm my system and disarm it after 1 second for example, it's still the same.

Ideas? Suggestions? Thank you very much...

Replies:

Posted By: Teamrf
Date Posted: June 20, 2005 at 12:54 PM

Put the key in the ignition and turn it to the on position. Then turn it back off and try it. If it doesn't reset the alarm check your wiring.

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.

Posted By: ManXP
Date Posted: June 21, 2005 at 6:43 AM

Thank you for nice suggestion.

Problem was solved by moving shock sensor to MIN level. I don't know, is shock sensor so sensitive or what?

Print Page | Close Window