Astroflex 2100 alarm disarm wire?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58085
Printed Date: April 30, 2024 at 2:40 AM

Topic: Astroflex 2100 alarm disarm wire?

Posted By: knospebd
Subject: Astroflex 2100 alarm disarm wire?
Date Posted: June 20, 2005 at 4:52 PM

I was wondering if anyone happens to know what wire off of an Astroflex 2100 is the alarm disarm wire and if it is a programable output, what i need to do to program it. I am working on a car for a dealership we do many jobs for and they had a customer come in with an 02 Explorer complaining that sometimes the unlock doesnt work, but if the vehicle is started it does work. It is obviously the GEM module falling asleep, and whoever installed this initially didn't know or think to wake this module up on the unlock. I know this sounds like a dumb question, but we deal mainly with Autopage and Viper, so i cannot find any information for this unit at all.

Thanks for any help,

Ben

-------------
Ben Knospe
Auto Trim North America

Replies:

Posted By: KarTuneMan
Date Posted: June 21, 2005 at 7:07 AM

With what you are describing, astroflex says to send a NEG(-) pulse to anyone of the buttons on the keypad on the door. (If the vehicle has factory security ONLY) On the connectoer labeledP2 use the brown wire (pin 13) it is a negative "pulse before" unlock or start! you dont need a relay. Let me know if I can help ya anymore

-------------

Posted By: knospebd
Date Posted: June 21, 2005 at 2:19 PM

Hey, I just wanted to thank you for the info. You helped me in a bit of a bind and i really appreciate it. Thanks!

-------------
Ben Knospe
Auto Trim North America

Posted By: KarTuneMan
Date Posted: June 21, 2005 at 10:53 PM

Kool!

-------------