97 Mazda 626 blinkers w/alarm?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58173
Printed Date: May 11, 2025 at 7:32 AM

Topic: 97 Mazda 626 blinkers w/alarm?

Posted By: six2six
Subject: 97 Mazda 626 blinkers w/alarm?
Date Posted: June 21, 2005 at 10:52 PM

I've got a 97 Mazda 626 with a compustar alarm installed and I was wondering if it is possible to hook up my parking lights wire from the alarm and hook it up to my blinkers? so this way when I arm or disarm the alarm my blinkers will blink instead of my parking lights. Any help will be greatly appreciated, and thanking all of you in advance.

Replies:

Posted By: Powermyster
Date Posted: June 22, 2005 at 5:12 AM

yeah just use diodes to isolate the two seperate circuits i have to use the indicators all the time over here thats the norm. and when i get alarms in from the states with just parking light wires i make a splitter with 6A diodes and they work

Posted By: six2six
Date Posted: July 01, 2005 at 3:12 PM

so take the signal from the park light wire and split it to the left and right blinker wire on the flasher unit with a 6A diode in between them?

Print Page | Close Window