2000 intrepid door lock problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58199
Printed Date: May 10, 2025 at 2:51 PM
Topic: 2000 intrepid door lock problem
Posted By: northballer
Subject: 2000 intrepid door lock problem
Date Posted: June 22, 2005 at 12:42 PM
OK I have the resistor's hooked up I have relay's hooked up and still wont work How do I get these door locks to work for the alarm it is an autopage 520 what is the problem.
Replies:
Posted By: northballer
Date Posted: June 22, 2005 at 1:18 PM
On the relay I have pins 85 and 86 hooked up to 12 volt and pin 30 to wire for alarm and pin87 to resistor is this right or wrong?
Posted By: darock
Date Posted: June 22, 2005 at 1:49 PM
looks like me and you are in the same boat.. when i get an answer i'll hit you up..please do the same
-------------
Don't get tired, get get better.
Posted By: darock
Date Posted: June 22, 2005 at 2:10 PM
hey..check out my posts..i think we got an answer...
-------------
Don't get tired, get get better.
Posted By: thepencil
Date Posted: June 22, 2005 at 2:28 PM
northballer wrote:
On the relay I have pins 85 and 86 hooked up to 12 volt and pin 30 to wire for alarm and pin87 to resistor is this right or wrong?
That doesn't sound like it's correct. It should be hook up looking something like this.------------- Be careful whose advice you buy, but be patient with those who supply it. 
Posted By: darock
Date Posted: June 22, 2005 at 10:49 PM
listen to this guy (thepencil)..he knows what he's talkin about..all my dorrs unlock/lock thanks to his advice... darock ------------- Don't get tired, get get better.
Posted By: OhioMike1101
Date Posted: June 22, 2005 at 11:38 PM
The 520 has built in 30A door lock relays. Just connect the resistors directly to the DL output wires. No need for external relays at all.
Posted By: KarTuneMan
Date Posted: June 22, 2005 at 11:54 PM
OhioMike1101 wrote:
The 520 has built in 30A door lock relays. Just connect the resistors directly to the DL output wires. No need for external relays at all.
This is the guy to listen too.....HE KNOWS.......... -------------
Posted By: darock
Date Posted: June 23, 2005 at 9:37 AM
my alarm brain had built in relays also but didn't have enough juice to get the doors to pop...i guess a 30amp should do your ride just fine...not to say Kar TuneMan doesn't know but thepencil helped me out, just thought I'd point him your way
-------------
Don't get tired, get get better.
|