How do i install L.E.D Scanner?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58318
Printed Date: May 09, 2025 at 11:13 AM

Topic: How do i install L.E.D Scanner?

Posted By: hoking
Subject: How do i install L.E.D Scanner?
Date Posted: June 24, 2005 at 5:59 PM

I have a Compustar, how do i wire up a L.E.D scanner into the system?

-------------
Michael Chan
04' Subaru Forester 2.5XS
Compustar 2W8000FMR
Alpine SWR-1241D
Alpine MRD-M500

Replies:

Posted By: OhioMike1101
Date Posted: June 24, 2005 at 7:46 PM

usually they come with

12V -

GND

and a trigger wire.

Posted By: accord78
Date Posted: June 26, 2005 at 8:29 AM

the scanner should have this wires

1. red = 12v-
2. black = ground
3. yellow = is ground when armed input or any negative input

most of the time in the alarm modules is the "orange" wire ground when amred

Print Page | Close Window