Print Page | Close Window

Viper 600

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5832
Printed Date: October 31, 2024 at 5:57 PM


Topic: Viper 600

Posted By: sador
Subject: Viper 600
Date Posted: November 24, 2002 at 7:10 PM

Hi Everybody!!!!!

I have a little problem with this alarm,the led light for this alarm keeping blinking all the time on or off always is blinking,does some know what could be the problem?

(Installed on Toyota Previa 91 with factory Alarm,Everything is working fine,also I used the main wire harness from the viper 550 but this harnees doesn't come with the yellow wire use it  for the ignition,like the original harness(viper600)now do you think that this could be the problem?




Replies:

Posted By: cpgoose
Date Posted: November 25, 2002 at 7:32 AM

not sure about anyone else, but I would say so.  how does the alarm know when the car is running?  does the alarm arm while you''re driving?





Posted By: sador
Date Posted: November 25, 2002 at 5:42 PM
no,the car running or not the light always is on.(blinking)




Posted By: Tfrggy
Date Posted: November 28, 2002 at 1:59 AM
Iwould have to agree the alarm does not know that the car is started.





Print Page | Close Window