791xv channel output time

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58441
Printed Date: July 05, 2025 at 4:51 PM

Topic: 791xv channel output time

Posted By: dragginaccord
Subject: 791xv channel output time
Date Posted: June 27, 2005 at 12:59 PM

I upgraded from an older 550esp(moved to other car) to a 791xv responder unit. The extra channel on my 550esp was instant on and instant off. The 791xv responder seems to be holding on for a second or so. I assume this is because of the response report part of the circuitry. If i were to get the optional one way remote would this extra channels act like my old system and be instant on and instant off? I need this output to respond to my input without delay. Thanks....

Replies:

Posted By: dragginaccord
Date Posted: June 27, 2005 at 3:08 PM

or can i program one of my older 550 remotes to the 791? i have a few extras.

Posted By: dare_ds69
Date Posted: June 28, 2005 at 6:48 AM

u just have to program the channel it said in the instruction munual.

the 550 remotes does not work on the 791 posted_image

-------------
how own your mind, control your life.
MECP certified. always use a DMM

Posted By: dragginaccord
Date Posted: June 28, 2005 at 9:40 AM

I've talkde to dei, you can't program the channel to have a shorter output. It holds on a second b/c of the 2way communication. Anybody else know if using the one way remote will mkae it act like older systems and be instant on, instant off?

Print Page | Close Window