91 accord keyless entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58477
Printed Date: July 16, 2025 at 8:58 AM

Topic: 91 accord keyless entry

Posted By: jamminjimbo
Subject: 91 accord keyless entry
Date Posted: June 27, 2005 at 11:28 PM

Hello-
I have a 1991 that I'm installing a dei valet 712t keyless entry in, and I wanted to know if i needed to use a relay when wiring up the horn to honk...

Thanks Everyone

Replies:

Posted By: thepencil
Date Posted: June 28, 2005 at 8:55 AM

Save the guess work, add a relay.

Horn Trigger lt. GREEN/ blue    -   column or horn relay.

HONDA, ACCORD, 1991, Horn Trigger
High-current ground. Use a relay when interfacing with this circuit.

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Posted By: jamminjimbo
Date Posted: June 28, 2005 at 10:40 AM

Thanks!

Posted By: thepencil
Date Posted: June 28, 2005 at 12:52 PM

You are welcome.

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Posted By: jamminjimbo
Date Posted: June 29, 2005 at 12:20 AM

I have a DEI Valet 712t keyless entry system, It says it has an onboard relay for domelight supervision. Does that mean i just need to hook up the wire to the door trigger, or is there more to it?? I have a 1991 honda accord if that helps

Thanks all

Posted By: joe_1
Date Posted: June 29, 2005 at 4:11 PM

if it syas it does than all you have to do is hook up the wire but make sure the suply is what you need being + or - coming from the relay otherwise this will cause you a few problems.

Posted By: jamminjimbo
Date Posted: June 30, 2005 at 2:50 PM

If I use a another relay(just to be safe) would that cause any problems??

Posted By: mo12v
Date Posted: June 30, 2005 at 3:06 PM

You don't need a Relay........

Dome Light

BLACK/ WHITE (-)

BROWN CONNECTOR ABOVE FUSE PANEL *

* Dome Light Also Found As WHITE/ BLACK

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: jamminjimbo
Date Posted: July 05, 2005 at 12:20 AM

Hello All--
ok, the domelight works just fine, but i can't for the life of me find the wire for the horn, could the colors of the wire possibly vary from the wiring guides? Any input would be greatly appreciated!--Thanks!

Posted By: Powermyster
Date Posted: July 05, 2005 at 4:31 AM

i find wiring colours to be inaccurate at the best of times LOL they are meant as a guide not as gospel.. get thge colour at the horn in the engine bay. make your connection there if you need to

Posted By: jamminjimbo
Date Posted: July 05, 2005 at 9:56 AM

Isn't that the truith!!, but I did go and dig around and find the correct color for the wire, thanks for your help!! posted_image

Print Page | Close Window