Print Page | Close Window

Viper 791xv Antenna

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58699
Printed Date: May 10, 2025 at 12:07 AM


Topic: Viper 791xv Antenna

Posted By: Gavsta02
Subject: Viper 791xv Antenna
Date Posted: July 01, 2005 at 9:36 PM

Hi all,

I've just bought a Viper 791xv from a friend who never installed it.

Most of it was there except the antenna itself and the loom for it. I ordered a replacement antenna however this does not come with the loom. Is this loom shielded at all? or is it possible to solder individual wires between the antenna and the brain. If I can do this could someone please tell me the order of the wires. Is it a direct connection like this:

|______|   Antenna

|   |   |   |

|-----------|   Brain

Or do the wires swap over and twist?
If this is not possible what are my options?

Also which is the best wire for me to connect the 529T window module to?

Thanks for your help,
Gavin




Replies:

Posted By: Gavsta02
Date Posted: July 02, 2005 at 8:12 PM

Please?

Someone must know?




Posted By: ccroadshop99031
Date Posted: July 02, 2005 at 11:11 PM
loom?   you mean the ant. wire?  if so a directed dealer can order it for you.



Posted By: kgerry
Date Posted: July 04, 2005 at 3:32 PM

where are you located?



-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979



Posted By: ccroadshop99031
Date Posted: July 05, 2005 at 10:26 AM
go to directed.com and you can find a dealer near you


Print Page | Close Window