01 Dodge Ram Door lock ?’s

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58904
Printed Date: July 12, 2025 at 4:12 AM

Topic: 01 Dodge Ram Door lock ?’s

Posted By: hy_tek69
Subject: 01 Dodge Ram Door lock ?’s
Date Posted: July 05, 2005 at 11:47 PM

Installing Remote Start (Infinity 1005) on a 2001 Dodge Ram 1500. No factory alarm or RKE. Remote start and alarm work fine. Can't seem to get door locks to work. Used this setup:

posted_image

Locks trigger once, but relays don't disengage and motor stays either locked or unlocked can't move even manually. Only way to disengage motor, is to pull pwr from coil. Am I missing something simple?

Replies:

Posted By: Teamrf
Date Posted: July 06, 2005 at 12:03 AM

only the unlock wire requires a relay. The lock wire is a positive trigger.

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.

Posted By: Velocity Motors
Date Posted: July 06, 2005 at 8:29 AM

If the relay is staying engaged, then make sure that the (-) trigger that your using is only a pulse not continous.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window