Print Page | Close Window

ford fiesta door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58946
Printed Date: April 20, 2024 at 2:58 AM


Topic: ford fiesta door locks

Posted By: joe_1
Subject: ford fiesta door locks
Date Posted: July 06, 2005 at 4:55 PM

does anyone know what type of system is on this car it is a 2000 model i just want to know if it uses negative or positive locking i need uk spec wire info if anyone has it thanks in advance



Replies:

Posted By: thepencil
Date Posted: July 06, 2005 at 4:59 PM
I only got the 99 model, so test the wire incase they are different.



DIRECTWIRE™ WIRING INFORMATION - FORD / FIESTA (UK) / 1999 / Keyless Entry


12volts          
Starter blk/blu or grey      ignition harness
Ignition black or green      ignition harness
Power Lock yel/blk or yel/blu    +   either kickwell
Power Unlock wht/vio or wht/grn    +   either kickwell
Lock Motor          
Unlock Motor          
Parking Lights+ blue & blu/red     at the steering column
Parking Lights-       
Hazards       
Turn Signal(L)       
Turn Signal(R)       
Door Trigger BLACK/ red    -   n/s kick panel
Dome Supervision          
Trunk/Hatch Release ORANGE / black      at the release switch
Power Sliding Door       
Factory Alarm Arm          
Factory Alarm Disarm          
Disarm No Unlock          
Horn Trigger          
Memory Seat 1       
Memory Seat 2       
Memory Seat 3       
Interface Modules: Not Available



      
This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.





-------------
Be careful whose advice you buy, but be patient with those who supply it.posted_image




Posted By: joe_1
Date Posted: July 06, 2005 at 5:03 PM
nice one for the info just wanted to get some info before i go and fit the alarm save me a bit of time





Print Page | Close Window