Print Page | Close Window

881xp door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58965
Printed Date: June 14, 2024 at 11:48 PM


Topic: 881xp door locks

Posted By: godshandkiller
Subject: 881xp door locks
Date Posted: July 06, 2005 at 11:08 PM

i have a 2000 mustang gt i'm going to install the 881xp do i need the 451m for the door locks and if so does anybody have a diagram how to wire it.thanks in advance



Replies:

Posted By: genehewett
Date Posted: July 10, 2005 at 7:17 PM

You do not need the 551m. The lock/unlock outputs from the system will do positive or negative pulse. Here is the wiring info.

Power Lock lt. green  +  20 pin plug, pin 20 at GEM
Notes: The GEM (Generic Electronic Module) is located above the driver kick panel.
Power Unlock purple  +  20 pin plug, pin 18 at GEM
Notes: The GEM (Generic Electronic Module) is located above the driver kick panel.


Print Page | Close Window