Wiring Keyless Entry to Door Poppers

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59088
Printed Date: May 10, 2025 at 3:04 AM

Topic: Wiring Keyless Entry to Door Poppers

Posted By: ec1ipse420
Subject: Wiring Keyless Entry to Door Poppers
Date Posted: July 08, 2005 at 6:49 PM

Anyone have experience with this? I installed door poppers on my eclipse and got keyless entry to wire to work with the poppers. Never done this before so if anyone has any ideas, or know how to do it Id greatly appreciate it.

Here is the wiring diagram for the keyless entry:
https://www.x-shield.x3performance.com/images/900s.jpg

Replies:

Posted By: Velocity Motors
Date Posted: July 08, 2005 at 8:15 PM

You will need one channel per door. Use the unlock for the driver's side and use an AUX channel for the passengerside door. Wire the door popper solenoid like you would a trunk release solenoid : https://www.velocitymotorsport.com/images/install_notes/206.jpg

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Powermyster
Date Posted: July 09, 2005 at 4:36 AM

i would use AUX's for both doors.

other wise when you disarm. the door will pop open.

imagine with a long range system you in a shopping centre and you unarm by accident and your door swings open LOL.

suppose it depends on yourself really

Posted By: ec1ipse420
Date Posted: July 10, 2005 at 9:41 AM

Powermyster wrote:

i would use AUX's for both doors.

other wise when you disarm. the door will pop open.

imagine with a long range system you in a shopping centre and you unarm by accident and your door swings open LOL.

suppose it depends on yourself really

if I use AUX for both doors, wouldn't that open both doors at the same time

Posted By: hagmanti
Date Posted: July 10, 2005 at 5:03 PM

Powermyster was suggesting using two different AUXes-- one for driver, one for pass.

Looking at your wiring diagram, I have no idea if you have two (or 8 or 1 or 0), so I don't know if that'll work for you,

Me

Print Page | Close Window