RSX 3.5 Remote page only works 1-way
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59163
Printed Date: June 10, 2024 at 11:20 AM
Topic: RSX 3.5 Remote page only works 1-way
Posted By: specialblendj
Subject: RSX 3.5 Remote page only works 1-way
Date Posted: July 10, 2005 at 1:47 PM
I have a Clifford Matrix RSX 3.5 alarm. The remote control has a little screen on it that shows you alarm diagnostics. Well lately the remote has only been able to send a signal to the alarm, and is unable to receive a signal back. I press the arm button, and the alarm arms, but the remote just beeps 4 times, indicating that the alarm never got the signal, but the alarm did. The remote still shows that the alarm is disarmed, regardless of whether it is or not. The remote arms/disarms the alarm just fine, the alarm just isn't able to tell it that it's working. I've checked the antenna to make sure its plugged in all the way and it is, and I've opened up the remote to check for any broken circuitry, but I can't find any. Has anyone had this problem?
Replies:
Posted By: Velocity Motors
Date Posted: July 10, 2005 at 10:49 PM
It sounds like it's your antenna. Replace the antenna and your problem will be fixed.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|