Print Page | Close Window

Alarm install on 72 Impala

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59210
Printed Date: April 28, 2024 at 7:03 PM


Topic: Alarm install on 72 Impala

Posted By: CorNut
Subject: Alarm install on 72 Impala
Date Posted: July 11, 2005 at 10:39 AM

I couldn't find any info on my car.. I purchased an Ungo SR6000 and I want to put it in my Impala. For what it matters, it is a convertible and it has the 400 in it. I am going to hook up the remote start on it and was going to also install some actuators for the locks that only work with the alarm(I am not doing any drilling in my interior, I am going to have the alarm totally hidden, no LED even). Where can I find out how to do the install?? Thanks for the help guys



Replies:

Posted By: CorNut
Date Posted: July 11, 2005 at 7:33 PM
nobody knows where I can find the info i need??




Posted By: swamprat323
Date Posted: July 11, 2005 at 9:29 PM
if you dont know how then i would take it to some one who does. that old of car should be simple enough. dont need a info on that car.




Posted By: CutDog504
Date Posted: July 12, 2005 at 1:59 AM
I dont have the wiring for that car, but most likely it is the usual GM colors. Which are:
12v-RED---Ign harness
Ign-Pink-- Ign harness
Starter- Purple or yellow--Ign harness
Accy--Orange-------Ign harness
2nd accy--brown----Ign harness
Door trigger(domelight)---white(-)--at any int light
Park lights---Brown(+)----HEADLIGHT SWITCH




Posted By: CorNut
Date Posted: July 12, 2005 at 2:12 AM
I know with it being so old it will be easy man, I'm not retarded ;) I am an electronics tech.. I just work on aircraft and not vehicles so all I needed to know was those "basic GM colors" like the guy above posted... You're out of your mind if you think I'd let a shop rip me off to install it on such a basic car :) thanks for the help guys.. I'll be doing it this weekend




Posted By: CutDog504
Date Posted: July 12, 2005 at 2:37 AM
no problem





Print Page | Close Window