Print Page | Close Window

791 on 92 seviile

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59297
Printed Date: May 10, 2025 at 1:35 PM


Topic: 791 on 92 seviile

Posted By: jae-rome
Subject: 791 on 92 seviile
Date Posted: July 12, 2005 at 3:35 PM

need help i recently installed a viper 791 on a 92 seville and the now jumps sporatically all over the place during acceleration and decelaration. any help on this would be of great help



Replies:

Posted By: jae-rome
Date Posted: July 12, 2005 at 5:38 PM
sorry i didn't be more specific earlier the tach is what is jumping everywhere during acceleration and deceleration any help would be great thanks




Posted By: OhioMike1101
Date Posted: July 12, 2005 at 7:16 PM
check the tach wire?

I saw something like that happen before on a car when the tach wire accidently touched a part of the engine and shorted out.




Posted By: jae-rome
Date Posted: July 13, 2005 at 12:39 PM
Engine is now checking voltage instead of tach. Mechanic said that the tach wire was causing the issue so i disonnected it. Although the problem still occurs even with out the alarm installed. Is something i could of done to cause this problem? The car was working fine for about a week or two before the customer came back about the issue.... Thanks





Print Page | Close Window