Viper 791 xv transmitter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59469
Printed Date: May 14, 2025 at 11:46 AM

Topic: Viper 791 xv transmitter

Posted By: nocoastmusic
Subject: Viper 791 xv transmitter
Date Posted: July 14, 2005 at 11:31 PM

I bought/ installed a viper 791 [in a 94 altima, if it matters] and it works [as far as i can tell], btu i cannot get the remote to do anything. the doors lock when i start the car, and unlock when i shut it off. besides that ti doesnt do much. it will beep if i try to prgram it, but ti doesnt do anything, maybe im doing it wrong?

any tips?

Replies:

Posted By: checom
Date Posted: July 17, 2005 at 4:01 PM

I got the same problem, trying to do the programing right now.....

Posted By: CutDog504
Date Posted: July 18, 2005 at 2:23 AM

maybe the remote is broke

Posted By: checom
Date Posted: July 22, 2005 at 3:31 PM

checom wrote:

I got the same problem, trying to do the programing right now.....

I got it, you have to open the switch key to ON position then push the valet button untill you ear the beep from alarm seaker, now you got it!!!!!!!!!!!

Posted By: chungo
Date Posted: July 22, 2005 at 3:55 PM

if the led in car is solid blue then ethe alarm is in valet mode

open 1 door and press lock/unlock/lock on your remote.

Print Page | Close Window