direct fax 1076
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59586
Printed Date: May 21, 2024 at 6:11 PM
Topic: direct fax 1076
Posted By: kiteman
Subject: direct fax 1076
Date Posted: July 17, 2005 at 10:20 AM
Put a Alarlm into a 2002 mustang it call for diode iso on the door tigger inputs (there neg trigger) maybe dei's iso is different, but I'm still not getting a door trigger. Whats the correct way to wire these, or does someone have the direct fax 1076
Replies:
Posted By: Scott35
Date Posted: July 17, 2005 at 10:25 AM
Just do a search for 1076 on here, there are about 6 different postings for it.
-------------
Tacomacrew
Posted By: Velocity Motors
Date Posted: July 17, 2005 at 10:27 AM
https://www.velocitymotorsport.com/images/install_notes/149.jpg Use yellow/black for the driver door trigger and gray/red for the passenger door. ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: kiteman
Date Posted: July 17, 2005 at 10:29 AM
I used those wires, but when I diode iso, I still get no door trigger,
Posted By: soundzplus
Date Posted: July 17, 2005 at 10:55 AM
kiteman wrote:
i used those wires, but when i diode iso, i still get no door trigger,
diodes backwards?? ------------- Soundz Plus, Inc
Complete Custom Car Audio
Warrenville, IL
Posted By: Velocity Motors
Date Posted: July 17, 2005 at 11:02 AM
Use diagram A, it's a much better way.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: kiteman
Date Posted: July 17, 2005 at 12:42 PM
What diagram A are you talking about?? I Tried the diodes both ways, they act the same either way
Posted By: Velocity Motors
Date Posted: July 17, 2005 at 12:47 PM
https://www.velocitymotorsport.com/images/install_notes/149.jpg DIAGRAM A ( the first of the two on the link that I sent you. ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: kiteman
Date Posted: July 17, 2005 at 12:53 PM
Quick question ? Why the relay ? Most diode iso would use just the diodes with the band away from the alarm. Is the relay used to wake up the BCM?
Posted By: Velocity Motors
Date Posted: July 17, 2005 at 1:02 PM
Gives more isolation than using 8 diodes. Use 4 diodes with the relay and it will ensure isolation of the trigger's.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: kiteman
Date Posted: July 17, 2005 at 1:18 PM
Okay. Last thing. You say 4 diodes? But this is a two door car. Where are all the diodes going? or am I using two with a relay... Also thanks so much for the help..
Posted By: Velocity Motors
Date Posted: July 17, 2005 at 10:45 PM
If you have a 2 door, you only need 2 diodes. If you have 4 doors then use 4 diodes. If you have 5 doors ( hatch or tail gate ) then you need 5 diodes, etc....
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: OhioMike1101
Date Posted: July 17, 2005 at 11:19 PM
Do you have the correct wires? Before isolating them, do they test correctly?
|