is there anyway to install a shock sensor

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59594
Printed Date: May 15, 2024 at 8:23 PM

Topic: is there anyway to install a shock sensor

Posted By: Luckydvl
Subject: is there anyway to install a shock sensor
Date Posted: July 17, 2005 at 1:12 PM

I have my alarm that came with my hyundai elantra. its the stock one is there any way to hook a shock sensor to it it doesnt have any signal imput can i just hook it to like the doom light or hood pin switch just wondering.

Replies:

Posted By: neilfrombestbuy
Date Posted: July 17, 2005 at 2:10 PM

unfortunaly no, but who wants to use a factory alarm in the first place, aftermarket alarms are sooooo much better ;P

Posted By: OhioMike1101
Date Posted: July 17, 2005 at 11:25 PM

Couldn't you hook up a shock sensor and use the trigger to pulse the door trigger and make the factory alarm think the doors are open? Then maybe have a relay wired so that when the factory alarm is disabled (unlock) it would break the power connection to the shock.

Sounds like more trouble than it is worth, but I think it could be done with some creativity and a hand full of relays.

Posted By: CutDog504
Date Posted: July 18, 2005 at 2:22 AM

Not worth the trouble. For the labor and all other crap involved you may as well stab in an aftermarket alarm.

Posted By: Powermyster
Date Posted: July 18, 2005 at 3:25 AM

it can be done using the door trigger but i'd go with a new alarm.

Print Page | Close Window