Malfunctioning New Alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59770
Printed Date: May 10, 2024 at 9:53 AM
Topic: Malfunctioning New Alarm
Posted By: percyv143
Subject: Malfunctioning New Alarm
Date Posted: July 20, 2005 at 3:47 PM
Hi. I just installed my Option Group LD 163-6C car alarm last year and everything worked fine until like 3weeks ago that it started to malfunction. my first remote can't trigger the on-off alarm set but sometimes it can trigger the 'locate car' and when i try to click the 'alarm-off' it wont do anything. sometimes too that i can set the alarm-on but when trying to alarm-off it again it won't do anything but the batteries are new and you can see the led in the remote shine brightly. i also tried the 2nd spare alarm and it does the same thing. i tried to remove the main harness from the unit where the 12V is located and i would hear a very faint alarm sound since the speaker is still connected. but still it is intermittently more not working. what can i do to fix it? thanks.
Replies:
Posted By: auex
Date Posted: July 20, 2005 at 4:03 PM
uh, valet mode maybe?
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: percyv143
Date Posted: July 20, 2005 at 4:55 PM
i dont know if it's in valet mode but if it is, i will try to disable it.. but what i know is by trying to alarm-ON the valet mode should turn-off. thanks.
|