Texas A&M writing class student

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59772
Printed Date: April 28, 2024 at 5:10 PM

Topic: Texas A&M writing class student

Posted By: dyer
Subject: Texas A&M writing class student
Date Posted: July 20, 2005 at 4:08 PM

Howdy,

For a formal report in my technical writing class at Texas A&M I am designing a guide to the "design and application of a vehicle security system" Part of my project is to obtain knowledge from professionals about what my guide should include. So here I am. It would be great if you guys could spout out some stuff to me about what you think is crucial knowledge when designing a vehicle security system. Not so much the installation aspect, but stuff like "knowing what types of sensors are most effective for desired detection"....stuff like that. Thanks guys

Trying to pass a class and include my passion while at it!

-------------
Dyer

Replies:

Posted By: Velocity Motors
Date Posted: July 20, 2005 at 4:58 PM

Sensors & modules required:

Glass breakage
Tilt Sensor
Impact Sensor
Perimeter Sensor ( for convertibles )
Door / Trunk / Hood trigger
Pager system
SPDT Relays : For starter interrupt as well as ignition cut off ( if desired ) & fuel pump cut off

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: dyer
Date Posted: July 20, 2005 at 5:01 PM

Hey I appreciate your responses, thanks for everything!

-------------
Dyer

Posted By: gcorrea
Date Posted: July 20, 2005 at 5:17 PM

hiding all of your wires, making it look as stock as possible is also a part of a good install.

-------------
gcorrea