2001 gmc yukon remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59794
Printed Date: May 15, 2024 at 11:51 PM

Topic: 2001 gmc yukon remote start

Posted By: toyotaman78
Subject: 2001 gmc yukon remote start
Date Posted: July 20, 2005 at 10:29 PM

I installed a prestige aps996a into a 2001 gmc yukon. He is bringing the truck back because he says his odometer doesn't work. He didn't mind it when i installed because it didn't put miles on the display but now he wants to sell it. I've never had this problem with any vehicle, i didn't know if anyone had ever had this happen. I checked all the fuses the other day and they were all good. let me know if anybody knows where to start on this one.

Replies:

Posted By: thepencil
Date Posted: July 21, 2005 at 10:21 AM

It has never happen to me, and I highly doubt that it is realated to Prestige unit that you install.

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Posted By: Powermyster
Date Posted: July 21, 2005 at 11:03 AM

never happened to me. but cars can be crazy at times.

if its cable the cable goes from teh gear box to the back of the dials perhaps you have pulled at it accidentily.

if its electrical that would be unusual because if the dials work you would have had to snag the right wire coming out of the dials and there is a whole bunch of them that go in about 25..

also is the speedo working because if its a cable system the speedo won't work if the odo stops they both stop far as i remember ayway..

so take out the dials and check connections.

hope this helps

Posted By: toyotaman78
Date Posted: July 22, 2005 at 11:39 AM

appreciate the help truck coming in today will let u know

Posted By: Powermyster
Date Posted: July 22, 2005 at 11:40 AM

good luck hope it fixes easy for ya

Posted By: accord78
Date Posted: July 22, 2005 at 6:28 PM

first of all forget about the wire to the gear box... beacuse it's all computerized now no more wires. if u installed a prestige i don't think u had to go into the instrument cluster my thought could be is that the cluster took a shhh!! and i know there's some stupid people out there but when he brings it back make sure it's on the odometer setting instead of the trip setting :)