Connecting Accessories to Viper 791XV aux

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59806
Printed Date: May 04, 2025 at 3:30 AM

Topic: Connecting Accessories to Viper 791XV aux

Posted By: linuXshock
Subject: Connecting Accessories to Viper 791XV aux
Date Posted: July 21, 2005 at 2:56 AM

hi
im driving a 95 sentra.
I have the 791xv installed in it (by the dealer).
Soon I'll be installing new sets of fog lights and i was just wondering if i could use one of the auxilary channels on the alarm to use with the fog lights as an on/off switch. If im not mistaken the output on channel 4 and 5 are 200mA. Would the fog lights be too much to install as an auxilary accessory? How about strobe lights?
How many channels are programmable and which ones are they?
Any help will be greatly appreciated.

Replies:

Posted By: Powermyster
Date Posted: July 21, 2005 at 3:39 AM

aux's are meant to be used with relays. you can turn on near anything with an aux and a relay.

the fog would be done like so ( most fog light will have to be wires with a relay anyway)

SPDT Relay

85 - (-)200mA output from alarm (can also put a switched neg to this p[in if you wanna use a switch too) Diodes might be needed for this

86 - constant 12V source

30 - constant 12V source

87 - lights

Posted By: linuXshock
Date Posted: July 21, 2005 at 5:12 AM

thanks for info

Print Page | Close Window