kill switch

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59838
Printed Date: May 02, 2025 at 8:27 PM

Topic: kill switch

Posted By: sparkyspider
Subject: kill switch
Date Posted: July 21, 2005 at 6:17 PM

If I wanted to install a starter kill switch, would I need a relay? If so I diagam would be nice...:)

Replies:

Posted By: Powermyster
Date Posted: July 22, 2005 at 5:00 AM

find the starter wire. cut it.

and wire relay like so.

SPDT RElay.

87A - Not used.

87 - starter side of starter wire.

30 - Ignition side of starter wire

86 - 12V constant.

85 - earth. put the kill switch on this wire between. solid chassis ground and relay..

all done. take you about 20 mins

Posted By: thepencil
Date Posted: July 22, 2005 at 9:01 AM

Starter Kill Wiring Diagram

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Posted By: Powermyster
Date Posted: July 22, 2005 at 11:37 AM

is that not what he wants a kill switch..

Posted By: Powermyster
Date Posted: July 22, 2005 at 11:49 AM

so i'm right for once.. COOL!!

Posted By: thepencil
Date Posted: July 22, 2005 at 12:27 PM

You are right bobk, No alarm follow Powermyster instruction. If you got an alarm follow my diagram.

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Posted By: sparkyspider
Date Posted: July 22, 2005 at 1:38 PM

Im trying ti understand, why, just for a kill switch do I need a relay? I dont have an alarm,and want to put a kill switch untill I get an alarm. Whu can`t I just cut the ignition wire,put switch in and be done?

Posted By: sparkyspider
Date Posted: July 22, 2005 at 2:33 PM

Thanks for the info. I have a lot to learn...:)

Posted By: Powermyster
Date Posted: July 23, 2005 at 6:33 AM

also you will need a big switch to kill starter to switch a relay you can have a little small hidden switch..

Print Page | Close Window