viper 791 alarm, 91 honda accord

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59962
Printed Date: May 19, 2025 at 1:25 PM

Topic: viper 791 alarm, 91 honda accord

Posted By: memin
Subject: viper 791 alarm, 91 honda accord
Date Posted: July 24, 2005 at 10:18 AM

I have just installed viper 791 alarm system in my 91 honda accord coupe. Door locks are working fine, but status led always on without blinking when I take out the key from the ignition. And also chime is not working unless I use panic mode. I need help about this issues. thank you so much for your help.

:errr:Emin

-------------
determined

Replies:

Posted By: iskidoo
Date Posted: July 24, 2005 at 11:19 AM

Look in the manual to see how to use Valet mode. It is most likely in Valet mode.

Posted By: alpine0000
Date Posted: July 26, 2005 at 2:19 AM

memin] wrote:

P>Hi
I have just installed viper 791 alarm system in my 91 honda accord coupe. Door locks are working fine, but status led always on without blinking when I take out the key from the ignition. And also chime is not working unless I use panic mode. I need help about this issues. thank you so much for your help.
Emin

yes, the alarm is in valet i believe. you need to open the driver door (and leave it open). put key in ignition and turn key on, then off real fast, then press the valet button. this takes it out of valet (or can put it back into valet)

try that

Posted By: memin
Date Posted: July 29, 2005 at 3:25 PM

Thank you so much everybody. I solved the problem with your helps.

-------------
determined