Print Page | Close Window

94 accord door lock actuator question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59976
Printed Date: May 19, 2025 at 3:52 PM


Topic: 94 accord door lock actuator question

Posted By: rubenk1
Subject: 94 accord door lock actuator question
Date Posted: July 24, 2005 at 3:10 PM

Hi,

I am planning on installing a generic/universal door lock actuator on my 94 accord (I'm sure most of you know the 94-97 models had problems with their actuators not sending the proper grounding signal so the lock would constantly try to lock itself 5+ times before it stopped locking).  Anyway, I was wondering if anyone had any tips as far as the install is concerned because I know the Accord actuator is physically different (a "box" rather than my universal actuator's  "gun" shape).  So, are there issues as far as wiring or finding the proper length rod or any welding issues I should know about (heck, if I could Crazyglue the actuator to my door panel, I would).  Also, I have an alarm with automatic door locks...is there anything else I should be thinking about before I embark on this project.

Any assistance would be appreciated,

Ruben




Replies:

Posted By: iskidoo
Date Posted: July 24, 2005 at 3:16 PM
You'll need 2 relays to wire your actuators to from your alarm. Most alarm systems aren't strong enough to control the actuators directly. Unless your acuators came in a kit with a control relay and switches. What brand/model is the alarm?

-------------
Steve G


Print Page | Close Window