Print Page | Close Window

99 silverado keyless entry relay

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60147
Printed Date: May 15, 2024 at 1:45 PM


Topic: 99 silverado keyless entry relay

Posted By: slimthug30641
Subject: 99 silverado keyless entry relay
Date Posted: July 26, 2005 at 8:53 PM

I just got a bulldog keyless entry M/N-Ke100 now my truck all ready had actuators but no keyless entry or alarm, so   i ran wires to my keyless entry i got 3 relays 2 for the locks and 1 for my headlights to flash when i hit the unlock/lock button and it works perfect so then i tried hooking up the lock relays i tried 3 wire positive/negitive and actuator / Reverse Polarity and none of them work i know the relays work cause i hooked them up to the headlight flash and it works.the actuators only have 2 wires if u get a 9volt battery it will lock/unlock when u switch the wires to + & -.So my question is should i get a new alarm with a keyless entry or new actuators.unless anybody else can figure out what the problem is.Thanks ryan



Replies:

Posted By: iskidoo
Date Posted: July 27, 2005 at 1:15 AM
No, you should be able to use what you have to make everything work.

Wire your relays like the top part of the diagram.

https://64.85.6.129/extrainfo/diagrams/14301_STORM_ACTUATOR%20DIAGRAM%20JBS%20UNITS.pdf

Or use this diagram from this site in the relay section.
posted_image
https://www.the12volt.com/doorlocks/page3.asp#arp

-------------
Steve G


Print Page | Close Window