mercedes ML 320 keysense wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60184
Printed Date: July 13, 2025 at 1:40 PM

Topic: mercedes ML 320 keysense wire

Posted By: Johnnynguyen20
Subject: mercedes ML 320 keysense wire
Date Posted: July 27, 2005 at 9:07 AM

Hello, my mercedes ML 320 got a KEySENSE wire. the diagram said this wire requried to remote start. Can you help me with this, What wire from remote start should i connect to the KEysense wire?

-------------
Johnnynguyen

Replies:

Posted By: Velocity Motors
Date Posted: July 27, 2005 at 9:17 AM

It is the ORANGE wire at the ignition key switch and this is a (+) input. You will need a relay to convert this signal over if your using a universal bypass module or if the bypass module accepts both (-) & (+) then change the jumper over to (+).

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Johnnynguyen20
Date Posted: July 27, 2005 at 8:33 PM

Velocity Motors wrote:

It is the ORANGE wire at the ignition key switch and this is a (+) input. You will need a relay to convert this signal over if your using a universal bypass module or if the bypass module accepts both (-) & (+) then change the jumper over to (+).

So, from the bypass module there is two wires from it. one is (-) and (+) which one i have to convert to?

-------------
Johnnynguyen

Posted By: mo12v
Date Posted: July 27, 2005 at 8:51 PM

Depending on your ByPass unit........You would use the ( + ) Positive

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Print Page | Close Window