2000 Chevy Malibu Anti Theft Device
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60266
Printed Date: May 16, 2024 at 12:06 AM
Topic: 2000 Chevy Malibu Anti Theft Device
Posted By: Skunkpu
Subject: 2000 Chevy Malibu Anti Theft Device
Date Posted: July 28, 2005 at 10:26 AM
Hey all. New to this forum. Need help. Have a 2000 Malibu that the Anti Teft device comes on a lot of the time. So I am stuck for 15-30 minutes at a time. I hate this damn thing soo much. Just need to know if the 2000 Mailbu has a passlock, passlock I, or passlock II system. I believe I do not have a coded key. The dealership wants to charge me $400 - $500 to replace the entire ignition switch and other parts associated with the ignition switch. Not to mention they want to keep it for a week or more. I just can't afford this type of money. Any help would be greatly appreciated. Thanks in advance.
Replies:
Posted By: iskidoo
Date Posted: July 28, 2005 at 11:55 AM
2000 Chevrolet Malibu
Category: Immobilizer Bypass
Required: Yes
Type: Passlock II
Part#: 556LW
Notes:
Alternates: 555LW, 555T
https://directechs.com/directwire/wire_body.asp?action=select&yr=2972&product=Remote%20Start------------- Steve G
Posted By: Skunkpu
Date Posted: July 28, 2005 at 2:50 PM
iskidoo, Thanks for the help. It is greatly appreciated. Have a good day.
Posted By: Skunkpu
Date Posted: July 28, 2005 at 2:54 PM
Don't suppose you know where it would be located on the 2000 Malibu? Just a shot in the dark. Thanks again.
Posted By: iskidoo
Date Posted: July 28, 2005 at 5:20 PM
Should be in the Igntion Harness which is trickiy to get to.
To access the ignition harness remove the radio (without unplugging it) or the panel just above the radio.
------------- Steve G
Posted By: shesaidshewas18
Date Posted: July 28, 2005 at 10:05 PM
Do you have an aftermarket alarm? If so, just hookup the factory dis-arm wire to your domelight output wire from your aftermarket alarm. I
Posted By: Dsteinmann
Date Posted: July 29, 2005 at 1:30 AM
you just need to replace the ingnition cylinder its about $175 from the dealer its pretty easy to install
Posted By: shesaidshewas18
Date Posted: July 29, 2005 at 3:37 AM
What is it exactly does he want to do though? If he just wants to shut it off, why spend $175 when you can just shut the factory alarm (Im assuming its the same as the anti-theft) could be dis-armed easily (Again, assuming he has an aftermarket alarm)
Posted By: Skunkpu
Date Posted: July 29, 2005 at 7:50 AM
The car really isn't worth much resale. Really don't want to dump more money into it than needed. I just want to disbale the anti theft device. Much cheaper than throwing another $175 plus eight hours of work on top of that 'cause I am not mechanically inclined. Plus what happens if I screw something up. Then I would probably be throwing much more money into it. Cheaper to disable it. That's it. Thanks for all the input on this subject.
Posted By: Hornshockey
Date Posted: July 29, 2005 at 11:19 AM
I just read a thread on here not two days ago about disabling the Passlock anti-theft on GMs. Guy got flamed pretty bad; but it might help you out.
------------- Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.
|