96 maxima and trunk release

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60305
Printed Date: July 07, 2025 at 5:52 AM

Topic: 96 maxima and trunk release

Posted By: MAXIMUS96
Subject: 96 maxima and trunk release
Date Posted: July 28, 2005 at 8:22 PM

i found out the trunk trigger is -12 for the maxima from the digrams provided on this site. I can't remember if the Viper 600ESP outputs 12+ or 12- on the 3rd channel. if its 12+, how do i wire a relay to send a 12- signal? if its 12- from channel 3, do i still need a relay? if so how would i wire that?

thanks

Replies:

Posted By: Powermyster
Date Posted: July 29, 2005 at 5:16 AM

I'm sure its a (-) output.

86 - alarm output

85 - constant 12V

30 - solid Chassis Ground

87 - (-) to solenoid

Posted By: thepencil
Date Posted: July 29, 2005 at 8:34 AM

Trunk/Hatch Release purple / YELLOW - low drivers kick

NISSAN, MAXIMA, 1996, Trunk/Hatch Release
Must use a relay to interface with this circuit.

WHITE/ Blue is a low current 200 mA negative output wire on the unit. Follow Powermyster direction for the relay connection and you are all set.

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Posted By: MAXIMUS96
Date Posted: July 29, 2005 at 12:26 PM

sweet. thanks so much

Print Page | Close Window