05 Tacoma 2nd Starter Wire?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60353
Printed Date: May 07, 2025 at 7:53 AM

Topic: 05 Tacoma 2nd Starter Wire?

Posted By: chiarlanza
Subject: 05 Tacoma 2nd Starter Wire?
Date Posted: July 29, 2005 at 10:08 PM

Silly Question, but before I start the install......

The wiring diagram provided to me lists a "second starter" wire in the ignition harness. Can this wire be jumped off the first starter wire? or do i need to add a relay for it. I have never seen a "second starter" lead before..

Lastly, how would such be connected to a Valet 562T?

Thanks in advance..

Replies:

Posted By: mo12v
Date Posted: July 29, 2005 at 10:16 PM

I have seen some Diode Isolate.........But I use a SPDT Relay split off the Starter wire from RS.........

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: chungo
Date Posted: July 29, 2005 at 10:23 PM

no do this instead

85=12v

86= second stater from relay pac(purple)

30=second stater of car (blk/wht)

87=12v

Posted By: chungo
Date Posted: July 29, 2005 at 10:30 PM

when your done can you tell about the range on that unit

Posted By: chiarlanza
Date Posted: July 29, 2005 at 10:36 PM

If all goes well.. I will get you the results tomorrow...

I figured that a relay would have to be added.. it's never simple....

Print Page | Close Window