2005 Trailblazer w/automate AM9

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60366
Printed Date: May 03, 2025 at 7:04 AM

Topic: 2005 Trailblazer w/automate AM9

Posted By: rgriffin76
Subject: 2005 Trailblazer w/automate AM9
Date Posted: July 30, 2005 at 11:21 AM

Hello,

I have a 2005 Chevy Trailblazer with an Automate AM9 alarm installed and the perimeter lighting does not illuminate when you disarm using the automate remotes. It works fine with the factory remotes.

Is there an issue with the AM9 and the perimeter lights coming on after the vehicle is unlocked?

Thanks for any advice you can offer.

Rich

-------------
Rich

Replies:

Posted By: iskidoo
Date Posted: July 30, 2005 at 4:17 PM

Perimeter meaning exterior parking lights or interior domelight?

Was the H1/4 BLACK/ WHITE (-) 200 mA DOMELIGHT SUPERVISION OUTPUT used to allow the interior lights to come on when disarming?

-------------
Steve G

Posted By: rgriffin76
Date Posted: July 30, 2005 at 10:24 PM

Steve,

The exterior lights (headlight and backup lights do not go on). I was told that this feature would only work with the factory remotes. I am not sure about the BLACK/ white wire connection since the alarm was installed at the dealer.

The vehicle is currently at the dealer because the car starts when you turn the key to IGN and gently tap the key instead of rotating the key forward against the resistance of the spring.

Thanks for the fast reply!

Rich

-------------
Rich

Print Page | Close Window