03 Mustang Cobra with 791vx

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60512
Printed Date: May 03, 2025 at 2:42 AM

Topic: 03 Mustang Cobra with 791vx

Posted By: jabshire
Subject: 03 Mustang Cobra with 791vx
Date Posted: August 01, 2005 at 10:47 PM

What wires do I use on the remote start when I get to the accessory and 2nd accessory? I have 3 wires (acces. and 2nd access) and orange and pink from the remote start harness. Is it only ok to grab one of the accessory wires. Or do I jump them? Any ideas?

Replies:

Posted By: mo12v
Date Posted: August 02, 2005 at 8:07 AM

Ignition Switch Layout:
Ignition #1 - RED / LIGHT GREEN.......Powers PCM (Primary Ignition). Ignition #2 - GRAY / YELLOW (2).......Powers Blower Motor *.
Ignition #3 - RED / BLACK.............Powers Airbag Monitor.
Accessory - BLACK/ L GREEN.........Powers Heat/Ac Controls.
* Two GRAY / YELLOW Wires Present At The Ignition Switch Are The Same Circuit.
Starter - WHITE/ PINK

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Print Page | Close Window