Just so I’m sure on this connection
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60628
Printed Date: May 06, 2024 at 8:52 PM
Topic: Just so I’m sure on this connection
Posted By: Sad, little man
Subject: Just so I’m sure on this connection
Date Posted: August 03, 2005 at 6:47 PM
I'm trying to figure out how I can integrate some of the wiring from a factory alarm my car used to have into a new aftermarket one. I've found wires for the horn and parking lights that each show 12V then drop to 0V when the switch is on. This would be considered showing ground when the switch is on, right? So should I connect these wires to the new alarm wires that output a ground when it wants these acessories on?
Replies:
Posted By: Teamrf
Date Posted: August 03, 2005 at 6:54 PM
What kind of car are you talking about?
-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.
Posted By: Sad, little man
Date Posted: August 03, 2005 at 7:50 PM
It's a '96 mazda miata, but don't go by any published wiring diagrams on it, because the alarm is dealer installed and you won't find it in any diagram. I just want to know if running these wires to the negative outputs on the alarm will make the acessories work like they should.
Posted By: swamprat323
Date Posted: August 03, 2005 at 8:51 PM
why dont you forget about the dealer alarm and just use a wire guide and be done with it.
Waht have you not connected yet.
Posted By: swamprat323
Date Posted: August 03, 2005 at 9:02 PM
your dealer alarm may have been fused, if he/she did it right it will. if for soem reason your alarm stops working for what ever reason you may have to find the fuse soem were on the dealer alarm. skip the future head achs and skip the dealer thing all togheter.
|