01 windstar

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6071
Printed Date: July 14, 2025 at 2:17 PM

Topic: 01 windstar

Posted By: jcarr
Subject: 01 windstar
Date Posted: November 30, 2002 at 5:01 PM

i'm in the process of installing a commando rs combo and i'm confused about the wiring for the park lights and also the remote start connection everything else seems to be going along fine

if you could help i would be very grateful posted_image

Replies:

Posted By: trusdamanr
Date Posted: November 30, 2002 at 5:28 PM

https://www.bulldogsecurity.com/wires2/wiringimages/WINDSTAR%20PARKING%20LIGHTS.gif hope this helps!!!

Posted By: jcarr
Date Posted: November 30, 2002 at 6:13 PM

thanks,i tried that .my question is the "brown"wire

is that the wire from the remote module?

also the remote is able to program features it says push the proogram swith

is that one of the buttons on the remote or is it the valte switch?

futher checking on my part the br/wht wite is the off position.shouldn't it have power fed to the30 an 87 pin

Posted By: trusdamanr
Date Posted: November 30, 2002 at 9:06 PM

thats correct the brown on pin 85 is the wire that goes to your parking light ouput. the relay when activated will ground out the BLACK/ green wire when its not energized the BROWN / white wire completes a circuit....also make sure you dont have the auto lights on..and the program switch im not really sure im not familar with those types of remote start... any other i would say the valet switch is the program switch.... but also some bulldog remote starts are programed through the remotes. so not really sure