Installed the Ungo SR6000, have some ?’s

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=60889
Printed Date: May 03, 2025 at 10:27 PM

Topic: Installed the Ungo SR6000, have some ?’s

Posted By: Norcaljason
Subject: Installed the Ungo SR6000, have some ?’s
Date Posted: August 07, 2005 at 4:43 PM

I know there are a lot of experienced installers on here, so here's a few questions...

This past weekend I installed the Clarion/Ungo SR6000 (same as DEI with two way paging LCD remote) on my Wife's 98 mustang cobra.

Despite taking a while to identify all the wires, everything is now hooked up and seems to be working fine.

Although, there seems to be some features that I'm not able to access.

Example - Warn Away: When making an light impact on the body, the warn away doesn't come on. A heavy impact sets off the alarm.

Example 2- Temperature doesn't work. It's supposed to have a function where the LCD remote will tell temp. Doesn't work at all.

I'm wondering if there are additional setup menus in the car alarm, that only pros can access. I'm guessing these menus control these functions.

Does anybody know how I can get these functions to work properly?

Thanks!

Jason

Replies:

Posted By: swamprat323
Date Posted: August 07, 2005 at 5:14 PM

on the warn away. the end that has the green wire that loop to the blue wire. this side needs to go to the shock sensor side.

as for the temp i dotn know never dealt with that model.

Posted By: Norcaljason
Date Posted: August 07, 2005 at 5:20 PM

swamprat323 wrote:

on the warn away. the end that has the green wire that loop to the blue wire. this side needs to go to the shock sensor side.

It sounds like you're saying: "swap the connector. The end with the green wire loop should be connected to the shock sensor"

Is this correct?

Posted By: swamprat323
Date Posted: August 07, 2005 at 5:36 PM

yes do a swap

Posted By: Norcaljason
Date Posted: August 07, 2005 at 6:37 PM

swamprat323 wrote:

yes do a swap

Thank you VERY much! Worked like a charm.

Jason

Posted By: swamprat323
Date Posted: August 07, 2005 at 6:55 PM

found the manural
for the temp" to see the temp of inside the car. press
lock, unlock, remote start button all at the same time.
this will not work if igntion is on.

Posted By: Norcaljason
Date Posted: August 07, 2005 at 6:58 PM

swamprat323 wrote:

found the manural
for the temp" to see the temp of inside the car. press
lock, unlock, remote start button all at the same time.
this will not work if igntion is on.

Thank you. Although I tried that. Nothing happens. I thought there might be some special menu system where I had to turn it on first.

Jason

Posted By: swamprat323
Date Posted: August 07, 2005 at 7:45 PM

try toggle though the Fahrenheit and celsius setting. i dont see a temp sensor on the alarm either

Posted By: utspazz
Date Posted: August 16, 2005 at 10:08 PM

You need to hold down the three buttons, (Lock, Unlock and Start) for @ 5 seconds.

Also, It will not work while in the remote start mode.

-------------
Ace

Posted By: Norcaljason
Date Posted: August 17, 2005 at 8:59 AM

utspazz wrote:

You need to hold down the three buttons, (Lock, Unlock and Start) for @ 5 seconds.
Also, It will not work while in the remote start mode.

Which button is the start button?