Stater kill (-) output

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6117
Printed Date: September 13, 2025 at 11:10 AM

Topic: Stater kill (-) output

Posted By: goofy1953
Subject: Stater kill (-) output
Date Posted: December 01, 2002 at 7:29 PM

Hi All,

I'm newbie of this Web site. i try to Install the remote,starter for my 1994 Toyota corolla. In the Installation guide show me " Orange : connect to a 30 Amp. Relay for starter kill (-) output." My question is:

1/ How to make starter kill? what part do I need to buy?

2/ I looked in diagram it show need diode 1 Amp. between 86 - 85 lead. What the voltage need? I checked at RShack have several voltage 50V.100V,..... What Voltage I need for diode?

3/ Could anyone show me wiring diagram Instruction for Stater kill .

I have some knowledge w/ basic car wiring and this is first time try to DIY.

Any input will be appreciated.

Replies:

Posted By: Velocity Motors
Date Posted: December 01, 2002 at 9:58 PM

This link will answer all three of your questions. You can get pre-wired diodes relays at most electronic stores : https://www.the12volt.com/relays/page2.asp#sk1

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: goofy1953
Date Posted: December 03, 2002 at 12:06 AM

ThanksJeff for your help ,

I looked at basic starter kill , it show the lead 86 " to ign.12V (+)" where it connect to ? and I bough the relay 20/30 Amp, and ask for diode. The Tech told me I don't need the diode. Is this right ?

Posted By: damon9
Date Posted: December 03, 2002 at 12:26 AM

yeah thats right some relays come with diodes, but make sure the 12 volt possitive is on 86...

-------------
damon

Posted By: Velocity Motors
Date Posted: December 03, 2002 at 12:56 AM

Use the BLACK / YELLOW wire from the ignition harness for the switched ignition wire for the relay.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: goofy1953
Date Posted: December 05, 2002 at 12:15 PM

Thanks again Jeff,

One more question: The lead 30 need to connect to starter wire from ign. switch Or have to connect to starter solenoid?

Posted By: Velocity Motors
Date Posted: December 05, 2002 at 12:33 PM

30 goes to the starter solenoid side of the cut starter wire.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: cva2000uk
Date Posted: December 05, 2002 at 5:24 PM

sounds like he is gonna have fun. posted_image

-------------
"you wont like me, when i get angry" .

Posted By: goofy1953
Date Posted: December 06, 2002 at 6:51 AM

Hell yeah, I'm working in garage for city around 2000 cars,trucks and heavy equipment .Unfortunately no electrical in my job except for general wiring . Other mech. when talk to them they don't help much. The main thing is learning so I don't hesitate to ask. I know will get help in this great site.

Hat off to you Jeff .

Posted By: Velocity Motors
Date Posted: December 06, 2002 at 12:32 PM

No problem, don't work too hard.... not worth it

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA