remote start on h. odessy
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6123
Printed Date: July 21, 2025 at 10:37 PM
Topic: remote start on h. odessy
Posted By: camino
Subject: remote start on h. odessy
Date Posted: December 01, 2002 at 9:27 PM
hi. i'm have to install a remote star on this2002 odessy.and the customer want's to be able to use the sliding door's,the van came with a factory remote to do that,so i decided to install a 700t hornet and a valet remote start module,no problem,the problem was when i remotly start the vehicle the keyless entry don't work,i know is because the baypass module is sending the pulse for the key sense,and when the key is on the ignition ,the keyless entry dont work,i know where is the keyless module.i cut the wire from the key sense,(blue/withe)and still the same,for now the van has the viper remote start,but the customer wants the sliding door working with a remote control,any help will be great, thanks guy's. ------------- el camino
Replies:
Posted By: securinu
Date Posted: December 01, 2002 at 10:39 PM
you need to find the ignition feed to the factory module and cut it thru a relay during remote start.
Posted By: jrilla
Date Posted: December 02, 2002 at 8:54 AM
Securino, do you know what wire is the ignition feed into the factory module? Camino, I am just curious what kind of range that factory remote gets. Have you tested it or has the customer tested it? I have a customer who wants a starter put in their Odyssey and they were willing to use two remotes, but if the factory remote works at a decent range, then I could just install an add-on.
-------------
J Rilla
Owner/Installer
Posted By: securinu
Date Posted: December 02, 2002 at 4:45 PM
i am not sure but there cant be that many wires to test , also i have a diagram on how to get those sliders to work with an aftermarket remote if you need it.
Posted By: jrilla
Date Posted: December 02, 2002 at 5:30 PM
I would like to see that wire diagram, but you would need a few extra channels for that right? You can send an email to: js12vinstallations@hotmail.com or you can post it if you want. ------------- J Rilla
Owner/Installer
Posted By: camino
Date Posted: December 02, 2002 at 11:07 PM
i know what wire you talking about,is yellow,but it didn't work,the think is when you put the key ,even without turning it to the ignition position,the keyless dont work,any way i'll install the sliding door with the viper remote start,3rd and 4rd chanel'sthanks,and about the diagram i did my own design and work's good.jrilla i recomend you to install an aftermaket,it's better for the range.ok?and if yo u have any question let me know.
-------------
el camino
Posted By: jrilla
Date Posted: December 03, 2002 at 5:17 AM
let me know what you you guys have hooked up to. I assume you just pulse a wire for each door using a relay, that is how I have done other sliding doors. email or post your information. Thanks a lot.
-------------
J Rilla
Owner/Installer
Posted By: camino
Date Posted: December 03, 2002 at 11:06 PM
well this cain of door,is not that easy,is data bus,to open and close,is not simply a pulse,so you have to build a set of relay's and a module to be able to do it..
-------------
el camino
Posted By: 10nesne1
Date Posted: December 04, 2002 at 10:27 AM
Hey Camino I email the diagram to Jrilla. If you post your email address then I can email you the diagram. It's very easy to hook it up. I did a couple this summer. 10nesne1
Posted By: Velocity Motors
Date Posted: December 04, 2002 at 1:06 PM
Hey 10nesne1, please email this to me and I will post it on the TECH TIPS page for other's to access aswell. My email is velocity@valleycable.com ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Velocity Motors
Date Posted: December 04, 2002 at 1:33 PM
Here is the link to the diagram : Honda Odyssey 1999+ Single wire Open/Close ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: camino
Date Posted: December 05, 2002 at 2:52 AM
ok, i did the same,but i have to use a special,module,to reduce,the time pulse from the alarm,i don't know,if the 2002 is the same like the 99.anyway's if works for you,,great that you can help aother's fellow installer's.i make it work to. i use channel 3 for one door,and channel 4 for the other.thanks again. .
-------------
el camino
|