it seems that the alarm system only supports cround or positive 3wire door locks, and ive been reading that the f150 is 5wire + how do i make the alarm compatiable with the truck?
bobk]L wrote:
ok at door locks at the left side of this forum.
okay i dont really understand to get it to work... could you help me?
bobk]D wrote:
d you look at the diagram, If you did what don't you understand. Be more informative.
well just ell me how to hoook up to get it to work, it seem that the alarm only gives a low voltage + or - and i have it hook up and i push the button and the door dont unlock, but when i test the wire and push the unlock button it gives a read so i know im in the right wire. but the system doesnt seem to unlock it. the system has a green a blue and a blurered wire.. know any thing about this?
bobk]H wrote:
w did you hooook up the alarm to what? Did you use relays? Need a hole lot more info if you expect help. Most alarm only have two wires for door locks if they don't have on board relays.
ok now i think ihave the right relay it came with my viper 791xv i didnt need it on the car that one went on, its a dei 451m, it says 5 wire harness. is this what i am looking for?.. and how would i hook this up to the wires in the truck with only 2 wires that "say door lock and unlock" these are the wires i found posted on the internet the pinkyellow and pickgreen
on the back it says v/b=lock/unlock,gr/blk=lockoutput, Wht/Blk=locknormally closed #87a, BLu/blk unlock output, Brwn/blak=unlock normally closed #87a