keyless entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6137
Printed Date: June 02, 2024 at 12:07 AM

Topic: keyless entry

Posted By: dazed
Subject: keyless entry
Date Posted: December 02, 2002 at 11:28 AM

I have a '93 MX6 with a Chapman alarm and would like to add a keyless entry. How would I wire it to the system and which brand(s) should I avoid?? Thanks, dazed

-------------
DAZED

Replies:

Posted By: Velocity Motors
Date Posted: December 02, 2002 at 11:47 AM

The alarm should have lock/unlock outputs on it already. Check your installation diagram for two wires that are marked unlock/lock. You will need to attach them to a couple of relays and add an actuator on the driver's side only. You will need to wire it in like this diagram shows: https://www.the12volt.com/doorlocks/page3.asp#arp

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: FourthGenHatch
Date Posted: December 02, 2002 at 12:04 PM

My brother has an MX6, the highest fully loaded on. His passenger side already has power locks because if you unlock the drivers side the passenger side will unlock to. He had to figure out how to mount an actuator in the drivers side. Not sure if he ever even got it to work or not.

Print Page | Close Window