Smartwindows 4

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61419
Printed Date: June 09, 2024 at 8:08 AM

Topic: Smartwindows 4

Posted By: Jerry79
Subject: Smartwindows 4
Date Posted: August 16, 2005 at 3:56 AM

I am wokirng on a 2000 corvette, smartwindows wiring was very simple. All windows are wired. but the windows only roll about 2 inches at a time. They only move 2 inches regardless if I use the remote to open them or use the car switch to roll up the windows. Any ideas. Also for the same car I'm also installing intellistart, having bunch of problem to start with can't get the tach to program. How do i use the voltage instead of tach.

Replies:

Posted By: 5150azn
Date Posted: August 16, 2005 at 1:51 PM

are you going to the motor wires or the switch wires?

-------------
Tell the Snap-On guy I'm not here!

Posted By: Jerry79
Date Posted: August 16, 2005 at 2:24 PM

I went to the motor wires. Thank you for the response I figured it out last night.

Print Page | Close Window