Transponder, 1997 Honda Prelude

I've just finished installing my new alarm system (855), and my remote start will not work because my car has a immobilizer system(3rd ign./Transponder)/ [1997 Honda Prelude].    In the manual it told me to build a relay.  Following all instructions the relay still fails to copy the key, or bypass the system.  I do not wish to buy an external module because of financial and pride issues ;).    I have taken the trim off of the ignition switch and there lies the heart of the transponder system.  On a seperate connector is a 2 pin connectector.  There are 2 wires that seemingly control the whole deal (that sends the output  from the circuit board inside the trim).  There is an orange wire and a white wire.  The white wire will not respond even if the key is next to it if I have a  ground on it (i.e. test light).  The orange wire is impartial to having a ground.  I have tried  disconnecting one of the wires (no luck), I have tried connecting the two wires (no luck as well).  Neither of the wires show a power signal, even when the key is on, or the engine is cranking.  My only other thought would be to connect the white wire to a constant 12v, but I worry of the consequenses.  Anyone that thinks they can help with wiring advice please reply.  Thanks.

-------------

No one?  Have to build the relay?  Have to use a key with coding to bypass immobilizer and basically disable it? lol.

Pride issues.........wtf does that mean? No such thing in this field.........do it right...dont hack it!

Alright, ill get the unit when I get the chance.  For now I guess I'll just hide the key close to the system in tape so I can still use the remote start and have a key.  Thx for the advice.

OMEGA makes a Good ByPASS also........

Honda/Acura Transponder Interface: TYPE-B (IB-H1)

Universal Transponder Bypass w/relayed (+/-) Keysense (PASS-4)

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.