Reprogramming DEI 555F?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61715
Printed Date: May 21, 2024 at 3:45 AM
Topic: Reprogramming DEI 555F?
Posted By: Porgieanne316
Subject: Reprogramming DEI 555F?
Date Posted: August 19, 2005 at 11:32 PM
About a year ago I installed a Delta Pro 5005. It has a LCD remote start pager and the typical 4 button black remote. [b}I accidently lost both of my keys to my 98 se contour. I had to get new keys and reprogram the ignition or whatever,
the point is the, codes for the car and the code from the old key that are stored in the module are not the same. I an not sure how to reprogram the PATS bypass Module to the new key codes, this module did not require that the key be pyhsically inserted into the actaual module the little glass pron a was twist tied to the ignition.
Now if i press the auto start button it will turn the car on but not crank the engine any one have any ideas. If anyone can tell me how to reprogram this to the new keycode i would love it. Perhaps someone still has there DEI 555F manual or instrucions and cam elail them to me or repsond with the steps on programing
Replies:
Posted By: extreme1
Date Posted: August 19, 2005 at 11:39 PM
turn key one on and count to five, remove and take key two and turn on anc count to five and remove, remote start vehicle.
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
|