No reverse lights on after RS install

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61778
Printed Date: May 14, 2024 at 12:48 AM

Topic: No reverse lights on after RS install

Posted By: homey88
Subject: No reverse lights on after RS install
Date Posted: August 21, 2005 at 11:28 AM

As the quiestion states, the car is a 2000 Grand Prix . At the same time the factory autolock quit working. Is this related? I checked for power at the light and at the rear harness plug there is none all my fuses in both boxs are good and everything else works fine and has for a few months. Does anybody have a rear harness wire diagram for my Grand Prix and BCM wire diagram. I dont know were to look, plese help and thank you in advance!

Brian:oops:

-------------
Brian

Replies:

Posted By: homey88
Date Posted: August 21, 2005 at 11:33 AM

The RS is a Crimestopper EZ-90 with a Bulldog Bypass.

-------------
Brian

Posted By: mo12v
Date Posted: August 21, 2005 at 5:42 PM

Body Control Module Located Behind Driver Dash To Left Of Steering Column.

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: homey88
Date Posted: August 21, 2005 at 5:46 PM

I found the problem!, was an unmarked fuse under the hood.

-------------
Brian

Print Page | Close Window