Print Page | Close Window

DEI 555S, Ford Focus

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61785
Printed Date: May 18, 2024 at 3:03 AM


Topic: DEI 555S, Ford Focus

Posted By: COVETTE03
Subject: DEI 555S, Ford Focus
Date Posted: August 21, 2005 at 1:15 PM

I need help installing the 555s in my focus. I connected the blue wire to the WHITE/ blue wire in the primary harness and the red was to a 12v fused source. I still couldn't get it to program can any one help?



Replies:

Posted By: mo12v
Date Posted: August 21, 2005 at 4:38 PM

COVETTE03 wrote:

. I connected the blue wire to the WHITE/ blue wire in the primary harness and the red was to a 12v fused source. ?

What year Focus?
Is the 12v  ( + ) Constant?}
Did you use 2 PROGRAMMED Keys to program 555s?
Does the R/S start & run with the Key in the Ignition?
Where do U have the capsule?



-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.




Posted By: COVETTE03
Date Posted: August 21, 2005 at 8:33 PM

04 focus

12v is tapped into the 451m

remote start does run with the key inserted

capsule is right by the ignitiong switch

i'm pretty sure the WHITE/ blue wire on the primary harness is what is the (-)activation input





Posted By: COVETTE03
Date Posted: August 21, 2005 at 10:07 PM

when i go to program it is the capsule supose to light up?

it says to insert a key and turn to run and wait until the security light goes out. what excatly does this mean? there is nothing that lights up whenever i do this even with the capsule right next to the key or the ribon.





Posted By: iskidoo
Date Posted: August 21, 2005 at 11:25 PM
The security light is in your instrument cluster. When you first turn on your key a bunch of little lights and icons turn on in the cluster. The theft or security light should turn on and then go out after a few seconds.

Just put the key in turn it to on for 5 seconds (without starting)

Quickly remove the key, insert the 2nd key and turn it to on for 5 seconds.

Quickly take the 2nd key out and hold the transponder ring up to the key cylinder. Hit the start button on the remote starter.

If it starts up and stays running it's now programmed.

Turn everything off and secure the ring to the ignition cylinder and then retest the remote starter. If it still works then put the steering column shroud back together.

-------------
Steve G




Posted By: auex
Date Posted: August 22, 2005 at 6:46 PM
COVETTE03 wrote:

when i go to program it is the capsule supose to light up?



Uh, the light is the theft light in the dash. So it is the car's light not the module.

mo12v] wrote:

id you use 2 PROGRAMMED Keys to program 555s?


What he said.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.




Posted By: COVETTE03
Date Posted: August 22, 2005 at 10:36 PM
lol thanks. i just never thought my car had chipped keys so i never looked at the dash.




Posted By: COVETTE03
Date Posted: August 22, 2005 at 10:58 PM

alright well the security light is above the hazard lights right above the cd player. (looked it up in the instruction manuel) the capsul had to be right on the plastic ring to program right. everything works great now. thanks for everyone that has helped me with this install. nothing else will be said on here (any questions wise) although when i get around to it I will type up and take pics of the install for anyone who needs it because everything works just like it should.

Thanks Alot,

Joe






Print Page | Close Window