Print Page | Close Window

2003 Sierra 791Xv&530T

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=61791
Printed Date: July 04, 2025 at 10:48 AM


Topic: 2003 Sierra 791Xv&530T

Posted By: dcabinatan
Subject: 2003 Sierra 791Xv&530T
Date Posted: August 21, 2005 at 5:41 PM

Exactly what wires are you guys splicing into? What type system should I go by :A,B or C. Also, does RED / white of 530T connect directly to RED / white of 791 XV, or do I need a relay? Everything else works fine, just trying to add window module.



Replies:

Posted By: mo12v
Date Posted: August 21, 2005 at 5:49 PM

Window UpDriverF\ BLUE
Pass\ LT BLUE
Dr Rear\ BLUE
PasRear\BLUE @ Each Switch Due to DATA Link
Window DownDriverF/ BROWN
PassF/ TAN
DrRear/ BROWN
PasRear/BROWN

Reversal Rest At Ground Type Window Circuit


-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: dcabinatan
Date Posted: August 22, 2005 at 6:43 AM
Where do you pick up the passenger door wires, at the passenger motor? Also, how should the gray wire be set up? Or do I need it at all?



Posted By: mo12v
Date Posted: August 22, 2005 at 9:54 AM

@ Each Switch Due to DATA Link

GRAY (-) Output During Activation: Connect this wire to an optional relay (P/N 610T) to bypass sensors which may trigger the security system during operation. This wire continues to output negative (-) ground for 5seconds after the window motors have stopped.

 



-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.


Print Page | Close Window